AS 425 60 Single Mitre Saw
AS 425 60 Single Mitre Saw
AS 425 60 Single Mitre Saw
AS 425 60 Single Mitre Saw
AS 425 60 Single Mitre Saw
AS 425 60 Single Mitre Saw
AS 425 60 Single Mitre Saw
AS 425 60 Single Mitre Saw
AS 425 60 Single Mitre Saw
AS 425 60 Single Mitre Saw

AS 425 60 Single Mitre Saw

ALU

600mm.

INO Single Mitre Saw | Aluminium cutting saw machine

Our single mitre saw for cutting aluminium profiles between 0 to 135 degrees with 600 mm sawblade. The sawfeed is supported by hydro-pneumatic cylinder and 3 kW motor with 3.000 rpm. The machine has 3 meter manual measurement system as standard; in this video optional 6 meter measurement system is connected. The spray pulse mist coolant, automatic opening and closing safety cover with pneumatic piston, movanle back fence and in-feed roller conveyor are the standard equipment included.

product_long_description

Product Properties

It is a single-head cutting machine with a 600 mm saw coming out of the bottom.
The table from which the saw comes out moves manually between 0-135 degrees to the right and left.0 degrees has a pinned angulation mechanism that snaps into place at 15 and 45 degrees on both sides.
With the rear underhoe moving up to 100 mm, profiles of different widths can be cut or mowing at zero degrees.The 3.0 kW saw motor rotates 3,000 rpm.2 vertical and 2 horizontal pistons are standard equipment in this machine.
Saw double-button systems go upwards with the operator holding both hands on the machine.The protective cover opens and closes automatically.When the operator commands with his left hand and commands with his right hand, the protection cover closes and the saw starts to move up.

machinery_dimentions

Machine Dimensions

Net dimensions: 4.500 X 1.300 X 1.350 mm.
Packing dimensions: 1.850 X 1.500 X 1.450 mm.
Weight: 350 Kgs.

processing_dimensions

Machining Dimensions

Maximum diameter: 170 mm.Maximum width that can be cut: 280 mm.The maximum height that can be cut is 205 mm.It is possible to cut wider dimensions by moving the rear caliper.

body

Main Body

Welded steel frame normalized by heat treatment.
The main body of the machine is machined in the 5-Axis CNC Steel Machining Center.
The entire body is painted with electrostatic powder paint.
Mostly all mechanical parts are machined in our own cnc machining centers or machined on cast material.
During the design process, our design team prioritizes the ease of use and ergonomics of the operators’ machines.In the mechanical structure, not only steel and aluminum are used; at the same time, fiberglass casting parts are also used to reduce the weight of the processing bridge and give the machine a more aesthetic appearance.

main_milling_motors

Spindles

3.0 kW, 3,000 rpm belt drive chainsaw.In case the saw is loaded, the engine is not damaged thanks to the wide belt.The saw attached to the machine is 600 mm as standard.

electric_panel_and_control_terminal

Electrical Box and Controller Terminal

The electrical panel is mounted on the side of the machine.The start buttons are also placed in front of the machine in a way that the operator can use most easily.The machine will not work without both hands of the operator on the buttons.

axis_properties

Axis features

There is a 3-meter manual measuring system next to the machine.The operator adjusts the length from there, then adjusts the angle of the table, checks whether the pistons are in the correct position relative to the angle, and then cuts the profile with the help of both hands.

standard_hardware

Standard Equipment

Control keypad consisting of manual buttons.PLC Control system and manual control.
600 mm saw.3.0 kW 3,000 rpm saw motor.
Automatic cooling of the saw with a spray lubrication unit.
The saw mechanism that comes out of the bottom.
Automatic movable protection cover.
Profile clamping group consisting of two vertical and two horizontal pistons.
3.0-meter measuring system and 3.0-meter hopper.

optional_equipment

Optional Accessories

The digital measuring conveyor MES 1500 models can be connected to this machine. 3 m. / 4.5 m. / and 6 m.

Votes  (2)
Offer Request

Product Reviews

There is no review yet.

Add a Review

Add Comment

Related Products

Display All
Ino MILANO – 4 Head PVC Welding and CNC Corner Cleaning Line

Ino MILANO – 4 Head PVC Welding and CNC Corner Cleaning Line

More Info
INO TESLA 41 Inside Outside Electronic Tilting Double Mitre Saw 4m

INO TESLA 41 Inside Outside Electronic Tilting Double Mitre Saw 4m

More Info
Ino BARCELONA – CNC PVC Profile Cutting and Machining Center

Ino BARCELONA – CNC PVC Profile Cutting and Machining Center

More Info
INO CARRERA 4 Axis CNC Profile Machining & Cutting Center

INO CARRERA 4 Axis CNC Profile Machining & Cutting Center

More Info
INO BOXTER 4S 4 Axis CNC Profile Machining Center

INO BOXTER 4S 4 Axis CNC Profile Machining Center

More Info
INO TESLA 40 Inside Outside Pneumatic Tilting Double Mitre Saw 4m

INO TESLA 40 Inside Outside Pneumatic Tilting Double Mitre Saw 4m

More Info

ALU

PROCESSING

MACHINES